JoeDios.com Forums - View Single Post - The interrogator shot!

Ok, here’s the 411 on how I did the Menacing interrogator shot:

First, the Idea! It came from LordRaven’s Pic with the interrogator.

LordRavens Masterpiece!

I wanted to show him shrouded in shadow. Sinister….Mysterious….Lethal. His Picture (LordRaven's) was all that, the only thing I could think of to improve the mood was seeing someone in his clutches. It’s like watching a spider. They are scary enough to me, but to see one trap and kill an insect is truly frightening. So I needed a suitable victim. I chose a Greenshirt. Who better to crack for info? A young, inexperienced Joe trainee makes a great victim.

Then I had to think, what would scare me if someone wanted info? A Scalpel, a scissor, bolt cutters, a hacksaw, a power drill and a sledge hammer. To round out the torture implements, I added a blowtorch and a batter re-charger and the obligatory defibulator, so when you flat line, we can bring you back for more fun. And of course, let’s add an IV to the victim. Nothing like a little more plasma to bleed out…..and a shot of adrenaline keep your victim going when all else fails. Handcuff the victim and set him in a chair, and throw the overhead light on!

To make the background give the illusion of an overhead light, I used paintshop pro to make a black background and paint a grey brick texture over it. I concentrated the gray in the center and layed off near the edges. I printed it out, and taped it to my background.

I set up my camera on the stand aiming at the subject, making sure to zoom in so you can’t see that the Background is a piece of paper taped up. I held the GI Flashlight over the pic with one hand and pushed the button on the cam with the other. To get the evil shadow on the wall behind Interrogator, I used an old lamp and put it on the ground behind the cam and slightly to the right.

I hope you enjoyed reading this as much as I enjoyed writing it.

09-20-2006, 10:46 PM	#1
ender098 Veteran Offline --> Posts: 3,665 --> Join Date: Dec 2005	The interrogator shot! Ok, here’s the 411 on how I did the Menacing interrogator shot: First, the Idea! It came from LordRaven’s Pic with the interrogator. LordRavens Masterpiece! I wanted to show him shrouded in shadow. Sinister….Mysterious….Lethal. His Picture (LordRaven's) was all that, the only thing I could think of to improve the mood was seeing someone in his clutches. It’s like watching a spider. They are scary enough to me, but to see one trap and kill an insect is truly frightening. So I needed a suitable victim. I chose a Greenshirt. Who better to crack for info? A young, inexperienced Joe trainee makes a great victim. Then I had to think, what would scare me if someone wanted info? A Scalpel, a scissor, bolt cutters, a hacksaw, a power drill and a sledge hammer. To round out the torture implements, I added a blowtorch and a batter re-charger and the obligatory defibulator, so when you flat line, we can bring you back for more fun. And of course, let’s add an IV to the victim. Nothing like a little more plasma to bleed out…..and a shot of adrenaline keep your victim going when all else fails. Handcuff the victim and set him in a chair, and throw the overhead light on! To make the background give the illusion of an overhead light, I used paintshop pro to make a black background and paint a grey brick texture over it. I concentrated the gray in the center and layed off near the edges. I printed it out, and taped it to my background. I set up my camera on the stand aiming at the subject, making sure to zoom in so you can’t see that the Background is a piece of paper taped up. I held the GI Flashlight over the pic with one hand and pushed the button on the cam with the other. To get the evil shadow on the wall behind Interrogator, I used an old lamp and put it on the ground behind the cam and slightly to the right. I hope you enjoyed reading this as much as I enjoyed writing it.